Motors Bolt-On Rear Disc Brake Conversion Kit, Fits For GM 10 and 12 E brake

  

Motors Bolt-On Rear Disc Brake Conversion Kit, Fits For GM 10 and 12 E brake. This kit is designed to fit 10 & 12 Bolt rear ends from. This kit is NOT designed to fit the following. (For truck applications, see 6-lug Disc Brake Kit or 5-lug Disc Brake Kit). The later 7.5" 10-bolt (For 7.5" axles, check out 7.5 10-Bolt Rear Disc Brake Kit). 10 and 12-bolts in fullsize cars like the Caprice, Bel Air, and Impala. (For full-size rear disc kit, see Impala Rear Disc Brake Kit). 10 and 12-bolts with staggered shocks. (If your car is so equipped, our Staggered Shock Rear Disc Brake Kitt is for you). To verify that this kit will work on your axle, you can double check that the flange where the caliper bracket will bolt up has the following dimensions. 3-1/8 center-to-center distance for the top two bolt holes.

2-11/16 center-to-center distance for the bottom two bolt holes. 2-7/16 distance from the center of the top bolt to the center of the bottom bolt.

Also check that the axle flange where the lug studs are pressed on has an outside diameter that is no larger than 6-1/4" and a brake register (the raised part at the center) that is no larger than 2.78". Please leave us your full name, your telephone number and detailed address when ordering. We try our best to pack the item as good and safe as possible, so they always arrive in a good condition. You can return the products in 30 days aftre receiving the products. To speed up the process, please let us know the reason why you want to return. If the reason is our side, please take some picture or video for evidence. We are here to help with any questions or problems you may have. We will reply all your messages promptly. FEEDBACK IS VERY IMPORTANT TO US.

Your feedback is very important to us. If you can't leave us a. We are eager to work with our customers.