Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1

Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1

Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1

Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1

Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1    Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1

PTK80AIS - Toyota 80 Part Time 4wd Conversion kit Aisin hub x 2 to 03/1994. TOYOTA LANDCRUISER 80 SERIESPART TIME KIT. This kit Suit80 series landcruiser withHF2A full time 4WD transfer case as fitted to all RV, GXL, and Sahara Land Cruisersfrom 1990to 03/1994. (Due to a change on the cv joint spline this kit is not a direct fit or04/1994 onwards models, See other listing for part time kit spool, aisin hubswith CV Joints to suit 04/1994 onwards). This combination gives you a Higher strength free wheeling Hub, waterproofing in hub selector ring and overall higher quality thatother brandcannot offer. This kit Suit80 series landcruiser withHF2A full time 4WD transfer case as fitted to all RV, GXL, and Sahara Land Cruisers manufactured from 1990 on. Better Fuel Consuption, improvement of Minimun 5%, in some cases up 10% have been reported. Improved steering, vehicvle no longer pulls hardwhen powering out of a corner. Imporved steering, Lighter and more direct. Improved acceleration, vehicle no longer powering anextra Diff, drive shaftand cv's. Longer service life on front driveline component due to not be driven. 2 x Genuine Aisin JapanFree wheeling hubs. When ABS equipped live axle vehicles are fitted with a Part Time 4WD kit, the ABS sensor reading from the CV joint becomes inoperable and the ABS warning light is displayed on the dash. The ABS relocation kit moves the sensor from the CV joint to the wheel hub and operates as per factory specifications.
See our store for ABSSensor relocation kit if required. Vehicles fitted with viscous coupled centre diffs can still use our Part Time 4WD kit. The switch is an easy plug and play with the necessary plug & wiring already provided in the Toyota wiring loom.
The centre diff becomes completely inoperative as the spider gears & the rear side gear is completely removed. The rear spool supplied in the kit is manufactured from heat-treated gear steel & internally splined to allow permanent drive to the rear wheels. The front side gear is retained, as it is required to support the front output shaft in the main housing. The kit is supplied with freewheeling hubs & is fitted to prevent the front diff, axles & drive shaft from turning while the vehicle is being driven. There are several benefits to consider when converting your Land Cruiser 80 or 100 series to Part time 4WD.
The steering no longer has a tendency to pull hard when powering out of a corner which adds to less wear & tear on the steering components such as tie rod ends & steering box. The steering is also more direct or positive. There is a marked improvement in fuel economy an average of 5%-10%. The acceleration is also improved due to the reduction in losses associated with driving the front differential, drive shaft & CV joints. With these components no longer being driven, a considerable increase in their service life can be expected. Can we fit it myself? The kit is supplied with full fitting instructions which are step by step. If you consider yourself mechanically minded & you can read instructions (believe me, not everyone can read) then yes, you can fit the kit yourself. There is no need to pull the transfer case out of the vehicle.

Remove the back cover off the transfer case fit the spool supplied as per the instructions. The freewheeling hubs are fitted as per the hub installation guide. There are no special tools required.

What if we can't fit the kit? No problem, your local mechanical workshop will be more than qualified to fit the kit for you or contact our sales team for an installation quote.

How do we engage 4WD once the kit is fitted? Simply press the centre diff lock button located on the dash, engage the hubs & select low range. If your vehicle has a viscous coupled diff your vehicle will not be equipped with a centre diff lock button & you will need to fit one. How do we know if our vehicle is fitted with a viscous coupling? A vehicle fitted with a viscous coupling does not have a centre diff lock button on the dash.

Do we need to fit a diff lock button when we fit the part time kit? This is to select 4WD in high range. The part number of the button is provided in the fitting instructions What happens to our Viscous coupling in the transfer case? The viscous coupling is no longer required & is removed from the transfer case. How does this affect our ABS?
If you have the IFS 100 Series Land Cruiser your ABS will not be affected as the ABS sensor is located on the wheel hub. The live axle models have the ABS sensor located on the CV joint.

By fitting the freewheeling hubs the CV joint is prevented from turning therefore affecting the ABS system & causing an ABS malfunction light to appear on the dash. To prevent this from happening you can leave the hubs engaged whilst ABS is required. We are not responsible for these payments and do not undervalue invoices as this is illegal.

A signature is required for all deliveries. Some images may contain accessories, equipment or parts that are not included in this listing to provide a clearer understanding of the product. These items are not included in the sale. In the unlikely event of a problem we will always do our utmost to rectify your issue. We are flexible and helpful, and simply ask that you are polite and honest so we can help you. TOYOTA LANDCRUISER 80 SERIESPART TIME KIT With Aisin hubs to 03/1994 only This kit Suit80 series landcruiser withHF2A full time 4WD transfer case as fitted to all RV, GXL, and Sahara Land Cruisersfrom 1990to 03/1994 (Due to a change on the cv joint spline this kit is not a direct fit or04/1994 onwards models, See other listing for part time kit spool, aisin hubswith CV Joints to suit 04/1994 onwards) This combination gives you a Higher strength free wheeling Hub, waterproofing in hub selector ring and overall higher quality thatother brandcannot offer. This kit Suit80 series landcruiser withHF2A full time 4WD transfer case as fitted to all RV, GXL, and Sahara Land Cruisers manufactured from 1990 on POSITIVESOF PART TIME KIT Better Fuel Consupt. We have a secure checkout system for all payments. Direct Deposit your amount into our account over the counter at your local National Australia Bank. Please Note: We DO NOT accept Paymate. Details of the carrier and tracking information will be provided after your goods have been dispatched. Please ensure the address you enter in the checkout is correct. We are not liable or responsible if you have not updated your details, and your item is sent to an old address. Pick-ups are possible from Warragul Victoria by appointment. It is the sole responsibility of the Purchaser to ascertain whether products comply with local laws. In some cases the products are intended for Off road use only.
ROAD RUNNER OFFROAD is a proudly Australian owned and operated business. Our team are highly experienced in all aspects of 4x4. We pride ourselves on aligning with quality suppliers & products. We trial and test many of our products on competition cars, racing under extreme conditions to ensure our products will stand up to the test of time.
Road Runner Offroad will accept any of our products for return if there is a fault with the product or the customer is unhappy with the performance of the item within a set time period. The original copy of the invoice must be provided to Road Runner Offroad. Where Do Customers Return Items? Road Runner Offroad will not be held liable for any damage caused to a vehicle from products supplied by Road Runner Offroad. It is up to the Person fitting the products to make sure the parts do work correctly and are fitted correctly and are the correct parts prior to fitting. T's & C's. All item prices include GST. All pictures displayed in our auctions are for illustration purposes only. All descriptions are provided in the best of our knowledge. While all care is taken, any errors or omissions in the item details is unintentional. The item "Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1" is in sale since Wednesday, December 20, 2017. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Other". The seller is "roadrunneroffroad4x4" and is located in Buln Buln. This item can be shipped worldwide.
  • Brand: AISIN
  • Manufacturer Part Number: PTK80AIS
  • MPN: Does not apply

Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1    Part Time 4wd Conversion kit With AISIN HUBS fits Toyota 80 Series 1990 to 03/1