Best Brightness H11 LED Headlight Low Beam Custom Fit for Toyota 4Runner 2020 2X
Super Bright LED Headlight Bulb Conversion Kit Low Beam. Top Features of customized LED Headlight Low Beam for 4Runner. Special LED bulb body design, perfect fit.
The off-center aluminum body design based on the OEM headlight housing. There is a metal bracket on the side of housing socket, which blocks the standard LED bulb to be installed. Customized dust cover protects headlights from water/dust/moisture. The built-in turbo fan on the dust cover was designed with an electronic valve. This electronic valve will open when the LED bulb is running, the turbofan dissipates heat to outside.
When the LED bulb stops working, the electronic valve will close automatically and prevents water/dust goes into the housing. The dual-cooling system design keeps effective air circulation and reduces the temperature difference, which can effectively reduce the fog. Superior Brightness bright your way home.
This Pro series LED bulbs used high-level automotive grade 8080MIL LED chips. The ultrahigh luminous efficiency up to 50W, 5000LM per bulb. One of the brightest LED bulbs on the market.
The power plug is the same as the factory stock plug, directly plug and play. Certification: IP67 Water and Dust Seal, CE, RoHS. Operating Temperature: -40-80 Degree Celsius. No need exterior driver or resistor parts. (If any quality problem we'll send free for replacement).
We provide friendly customer service and local support service at California State. Lasfit Provides Custom-Made LED Bulbs for different models. Q1: Will this bulb fit my vehicle? We can match almost any vehicle to one of our bulb sizes. Q2: My item has not arrived, what's taking so long? A: Sometimes items take longer than expected, especially if its going far or to rural area.
Check with your post office to see if your item has been held up. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap. Q3: Do I need to mention the Year, Make and Model in the notes when place order? Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
Q4: My bulbs won't fit, help! A: Special bulb holder may be required. See if you can take the holder from the stock bulb.
If not, let us know. The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications. Q5: Neither side lighting up?
Both sides flicker, flash, or work inconsistantly. A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle.
You probably just need a relay or capacitor. Q6: WARNING ABOUT POLARITY Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. If your light turns on, please proceed to install both bulbs onto your vehicle. If your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different. LASFIT® is not liable for any damages caused by installation or usage of our products.
Usually for US buyers it will take about 3-6 days to reach. For Canada buyes, it will take about 9-15 days to reach, sometimes it take longer time to reach Canada. CANADA & International customers please note.
To avoid initiating an unpaid item claim, please pay within 7 days. We will solve the problem!
We always put our customers first and your satisfaction is guaranteed. Our LASFIT Tech's are here to serve you.
The item "Best Brightness H11 LED Headlight Low Beam Custom Fit for Toyota 4Runner 2020 2X" is in sale since Monday, July 6, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Light Bulbs & LEDs". The seller is "lasfit-autolighting" and is located in Ontario, California. This item can be shipped worldwide.
- Brand: Lasfit
- Lighting Technology: LED
- Suitable For: Headlight
- Bulb Fitment Code: H11
- Light Color: Cold White
- Number of Bulbs: 2
- Type: Light Bulb
- Features: Ballast Included
- Manufacturer Part Number: ProT4H11
- OE/OEM Part Number: LED Conversion Kit
- Color Temperature: 6000K
- Wattage: 100 W
- Voltage: 9V-16V
- Performance Part: Yes
- Universal Fitment: No
- Lumens: 10000 lm
- Manufacturer Warranty: 2 Years
- Bulb Life Hours: Up to 50,000 Hours
- Interchange Part Number: H11
- Model: Pro-T4-H11
- Superseded Part Number: LED Headlight Bulbs
- UPC: 810038820996
- Fit for: Toyota 4Runner 2014-2020