Made to Fit Massey Ferguson Power steering Conversion Kit VPJ4051 135 240 240S W
Massey Ferguson Power steering Conversion Kit VPJ4051 135 240 240S W/Perkins. This is a Brand New Top Quality Power Steering Conversion Kit. Massey Ferguson TRACTOR: 135 (W/ PERKINS DSL ONLY). Massey Ferguson TRACTOR: 240 (W/ PERKINS DSL ONLY). Massey Ferguson TRACTOR: 240S (W/ PERKINS DSL ONLY). Center the steering wheel with the front wheels pointing straight ahead. Remove right and left drag links from the spindle steering arms to the steering gearbox pitman arms. The drag links will not be reused. (1) Note right & left are determined while sitting in the operators seat. On the left side of the tractor, install cylinder bracket (2) by welding to the existing radius rod. The center of the hole on this bracket must be 32-1/2 inches from the center of the hole on the existing steering arm. Install power steering cylinder (3) between the bracket and existing steering arm. Install pressure hose (4) from the pump to the cylinder. Install return hose (5) from the cylinder to the pump. Install new drag link (6) from existing pitman arm to the control valve on the cylinder. Do not force the drag link onto the control valve. You may need to center the cylinder to install. Tie rod arms (7) provided with the kit must be welded to the bottom of each spindle. The distance from the center of the hub to the center of the tie rod hole must be 43/4 inches. Assemble and install three-piece tie rod (8) and adjust toe-in.
Fill reservoir with power steering fluid. Start engine and turn the steering wheel back and forth several times to purge the system of air. Recheck fluid level, and add if necessary. Adjust pressure valve on cylinder if required. Recheck tightness of mounting hardware and hoses after one week.
Power Steering Pump Kit For MF135, 240 & 240S (Perkins Dsl Only). Contains all parts in picture and listed above. Not For Straight Adjustable Front Center Axle. Not recommended for applications with front end loaders. Kit Contents: mounting flange, power steering cylinder, long rod, hydraulic pump, pressure tube, emptying tube, 2 tie rod ends, hardware.
Our ordering system is automated. MyTractor carries a full line of tractor parts, accessories , decals , emblems and I&T Shop Service Manuals for most makes and models of tractors. We stock parts for the following brands: Allis Chalmers, John Deere, CaseIH, Kubota, David Brown, Mahindra, Deutz-Fahr, Massey Ferguson, Farmall, Minneapolis-Moline, Fendt, New Holland, Fiat, Oliver, Ford, White, International Harvester , Yanmar, J. MyTractorParts is a major North American Distributor for Aftermarket Tractor Parts including Filters, Engine part, engine kits, front end parts, tie rods, cylinders, pins, seal kits, rims, wheel hubs, axle parts, bearings, transmission gears/shafts, operator station parts, seats, PTO, hydraulic / steering / water pumps, radiators, oil coolers, hay balers parts.
Plough tools, rake teeth, alternators, starter and more!! MyTractor is an aftermarket supplier for John Deere®, Perkins®, Caterpillar®, Yanmar®, Cummins®, Kubota®, Mitsubishi®, Shibaura® and International Harvester®/Navistar®. All rights are reserved by these companies.
MyTractor is NOT an OEM supplier and does not represent these companies. All names, trademarks and part numbers are used for descriptive and identification purposes only. The item "Made to Fit Massey Ferguson Power steering Conversion Kit VPJ4051 135 240 240S W" is in sale since Saturday, June 11, 2016. This item is in the category "Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Steering & Power Steering". The seller is "mytractorparts" and is located in USA. This item can be shipped to United States.
- UPC: 0604716701147
- Equipment Make: Massey Ferguson
- Model: 135, 240, 240S
- Type: Massey Ferguson Parts
- MPN: A-MF100
- Brand: A&I
- Equipment Type: Tractor
