Universal Rear End Disc Brake Conversion Kit Black Fits Ford 9 Inch
Gearhead Ford 9 Rear End Disc Brake Kit. Provides an easy to install, bolt on solution for upgrading your pre 1980 Ford passenger car. Ford 9 Rear End Disc Brake Conversion Kit. Is unique in that it provides all the brackets and flanges that fit the three most popular sizes of the 9 rear end. This eliminates all guesswork when purchasing and installing the kit.
Black Rear Single Piston Calipers. Brackets & Flanges to fit. Drilled 5x4.5" for 1/2" Studs. Drilled 5x4.75 for 7/16 Studs. Fits Small Bearing Rear Ends. Center Opening Of 2.78. E brake cables are roughly 98 in length.
The installation of disc brakes will require the use of 15 disc brake wheels. Any attempt to install disc brake with a 14 wheel will be the installers responsibility. This kit is an aftermarket solution. It is not intended to be a direct installation or OEM replacement.
Due to changes in production in certain years, your application may require modifications for this kit to install properly. The inside diameter of this rotor will accept an axle flange that has a diameter of 6-1/8 or smaller.
If your axle flange exceeds 6-1/8 in diameter, you will need machine your axle flange to decrease your axle flange diameter to fit this rotor as necessary. When utilizing an aftermarket axle with disc brake conversion kits, it may be necessary to reduce the diameter of the axle flange to a diameter necessary to adequately fit inside the required. That the brake hat/brake rotor will require.
