LED Conversion for Maglite Flashlight 4,200 Lumen Fits 5-6 D cell, 12 LED

Instantly convert your incandescent Maglites into a SUPER POWERED LED flashlight! This easy to use LED conversion kit will take your under performing Maglite flashlight and turn it into a modern day champion. Twelve Latticepower high intensity LED emitters and the Lumencraft 7135 driver pound out over 4,200 retina searing lumens output of the bulbs is based on use of NIHM rechargeable cells. Also a great option is two IMR 26650 cell. Alkaline cells will power the bulb up at a reduced output so are best used as backup.

(flashlight host is not included in sale). Unlike these other lights Lumencraft Flashlights® Maglite upgrades come with the Actual Lumen Guarantee. Because of the superior driver performance and use of only premium grade components our products deliver on output. So, if your tired of being underwhelmed by competitors products, why not step into something great today.

In addition to the astounding output the new version of Lumencraft bulb comes with the most flexible user interface to date. Created by BLF member DrJones this UI has something to offer for everyone. Install To install the 3,500 lumen dopin, start by unscrewing and removing the head of your Maglite flashlight. Next remove the factory reflector, bulb retaining ring and bulb from the switch tower (if you have the bi-pin bulb you can press down on the tower to eject the plastic bulb holder). Next remove the bezel and lens from the top of the Maglite head.

Insert the 3,500 lumen bulb into the head. Place the lens over the dropin and thread the bezel back down until snug. Screw the head back on to the maglite until it is just "snug" onto the body. By default the bulb is set to have 3 levels of brightness, Low, Medium, High. To select the output mode half press the Maglite switch until the light comes on, quickly let off and half press the switch again.

Each time you do so the bulb will change output. The bulb will memorize the last mode used and come on in that mode when you power it back on. You can see a video on how it works by searching Youtube for "Adventure Sport user interface". This firmware allows the ultimate in user customizability, with 24 built-in mode groups, that the user can select via a series of button presses and the option of user programmable turbo timer that will automatically step the power down to 50% after the set time is hit (see below for instructions). For a video on how the user interface works you can search Youtube "Adventure Sport User Interface".

To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized. To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times.

The light will blink to recognize the mode group change. To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash.

With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power.

When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set.

The turbo timer steps the light down to 50% regardless of the mode group set. To disable the turbo timer simply go into program and cut it off in >3 seconds. Expansion ring for use with C cell lights here. 2,000 lumen 3 D bulb available here.

For other great flashlights, batteries, chargers and related products! Which owns the MAG family of trade marks including Mag-Lite and Mini-Maglite. My custom shorty flashlights are not made, endorsed, recommended, licensed or approved by Mag instruments inc.