Universal Fits Ford 9 Rear-End Disc Brake Conversion Kit, Unpainted
Achieve disc brake performance for your pre-1980 Ford passenger car 9 Inch rear-end with our easy to install, bolt-on conversion kit, This kit provides all the brackets & flanges that fit the three most popular sizes of the 9 Inch rear-end (3-3/8" x 2", 3-1/2" x 2-3/8", 3-9/19" x 2"), Comes with drilled and slotted 11" cast iron rotors that are dual drilled for 5x4.5" for 1/2" studs and 5x4.75" for 7/16" studs, Includes loaded natural single piston calipers, stainless steel brake hoses, E-brake cables & loaded calipers, as well as all brackets & hardware, Requires use of 15" wheels and an axle flange that has a diameter of 6-1/4" or smaller, if larger than 6-1/4" you'll need to machine it down to size. Universal Ford 9 Rear-End Disc Brake Conversion Kit, Unpainted.
The Speedway Ford 9" Rear End Disc Brake Kit provides an easy to install, bolt on solution for upgrading your pre-1980 Ford passenger car 9" rear-end to disc brake performance. Speedway's Ford 9" Rear End Disc Brake Kit is unique in that it provides all the brackets and flanges that fit the three most popular sizes of the 9" rear end (3-3/8" x 2", 3-1/2" x 2-3/8", 3-9/19" x 2").
This eliminates all guesswork when purchasing and installing the kit. The DBK9 comes in both standard and high performance models. The high performance LX kits upgrade to cross-drilled and slotted rotors and stainless steel braided brake lines. Unpainted Rear Single Piston Calipers. Brackets & Flanges to fit. Drilled 5x4.5" for 1/2" Studs. Drilled 5x4.75 for 7/16 Studs. Fits Small Bearing Rear Ends. Center Opening Of 2.78. The installation of disc brakes will require the use of 15 disc brake wheels. Any attempt to install disc brake with a 14 wheel will be the installers responsibility. This kit is an aftermarket solution. It is not intended to be a direct installation or OEM replacement. Due to changes in production in certain years, your application may require modifications beyond these instructions for this kit to install properly. The inside diameter of this rotor will accept an axle flange that has a diameter of 6-1/4 or smaller. If your axle flange exceeds 6-1/4 in diameter, you will need machine your axle flange to decrease your axle flange diameter to fit this rotor as necessary. When utilizing an aftermarket axle with disc brake conversion kits, it may be necessary to reduce the diameter of the axle flange to a diameter necessary to adequately fit inside the required Clearance I. That the brake hat/brake rotor will require.
(see above diagram for illustration). Big Ford (Old/New) & Small Ford. 2.36" - 2.50".
By hmccan on August 17, 2020. After making some modifications to the flanges the rotors fitted good, this 9 inch universal disc brake kit with emergency brake setup looks great. Yes, I recommend this product. By Speedy on May 04, 2020. Related Items / Suggested Parts.
AFCO 6691901 High Performance HT Brake Fluid, 12 oz. Motive Products 1810 Bleeder Catch Bottle. Please take advantage of the "add to cart" button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is America's Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice.
Speedway accepts full responsibility for the accuracy of our listings and product representation. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors". The seller is "speedway_motors" and is located in this country: US. This item can be shipped to United States.
- Brand: Speedway Motors
- Type: Disc Brake Kits
- Manufacturer Part Number: DBK9LX
- Item Height: 13.800
- Item Length: 15.600
